Welcome to affordableconcretecutters.net

“We Specialize in Cutting Doorways and Windows in Concrete Foundations”

Are You in Temple New Hampshire? Do You Need Concrete Cutting?

We Are Your Local Concrete Cutter

Call 603-622-4440

We Service Temple NH and all surrounding Cities & Towns

“No Travel Charges – Ever! Guaranteed!”

Temple, New Hampshire – A Quaint Town To Know About

Temple is one of the towns in Hillsborough territory of New Hampshire of US. The population of the town was 1366 as per 2010 census. The town is a home for Temple Mountain Province Reservation and earlier it was House to the Temple Mountain Ski region.

The town is a small and elegant rural community located on the beautiful Monadsnock place of south of New Hampshire. The city was initially settled by the Joshua Todd in the year 1758 and it become a separate town in the year 1768.Temple is a well renowned mountainous region comprise of several peaks as a part of Wapack range. The Temple Mountaintop was once a notable thriving Ski section and gradually it became State Reservation which has been preserved for the future generations to relish.

History of the town actually abounds here which include site of an Old Temple Glass Jobs that was established in the year 1780. Temple is also home for Temple Town band and it was established in the year 1799 and it claims to the “Americas first town band”. The city boasts iconic common along in addition to benches and trees. On the other hand, the place is surrounded by the old homes as well as historic buildings along with ancient village cemetery.

The town offers a friendly as well as elegant lifestyle off the beaten Route and even the residents of the town can enjoy a wide array of external activities in all the season. Besides, Temple is a home for farmers as well as small businesses.

Child development program at Temple

Under this program, children of 3-5 years age are provided with pre-school experience. This program is designed to cater the requirements of every child developmental needs. This program involves the entire family to get early education and focus towards their development. Children are equally addressed with issues like emotional, nutritional as well as their social needs.

Geographical features of the town

As per US census Bureau, the city as an overall area of 58.0 km2 (22.4 sq.miles), out of which 57.5 km2 (22.2 sq.miles) is land and 05km2(0.2 sq.miles) is water and remaining 0.96% comprise of town. The highest point of the town is situated 670 m above the sea level to the Monadnock Mountain and other one is situated at a height of 623m above the sea level. The temple mountaintop forms the western boundary for thousands of miles.

The discrepancy is due to the dropping of decimals during the computations. From Equation 33, we compute that x = 1.72; then (d - x) = 23.28. Substituting the value of the moment and of the dimensions in the upper part of Equation 35, we compute c to be 420 pounds per square inch. Similarly, making substitutions in the lower part of Equation 35, using the more precise value of (ci - x) for the lever-arm of the steel, we find s = 16,052 pounds per square inch. The student should verify in detail all these computations. The total required area of 5.08 square inches may be divided into; say, 8 round bars - inch in diameter. These would have an area of 4.81 square inches. The discrepancy is about five per cent. These bars, placed in two rows, would require that the concrete beam should be at least 10.78 inches wide. We shall call it 11 inches. The total depth of the concrete beam will be three inches greater than ci, OT 28 inches. This means 23 inches below the concrete slab, and the area of concrete below the concrete slab is therefore 11 X 23 = 253 square inches, rather than 12 X 22 square inches, as assumed for trial. The shearing stresses between the rib and concrete slab of the girder are of special importance in this case.

The quantity 5h of Article 293 equals the total compression in the concrete, which equals the total tension in the steel, which equals, in this case, 16,052 X 5.08 = 81,544 pounds. This equals 3 bzl, in which b = 11, 1 = 16 (feet), and z is to be determined: z = 81,544 -- (3 x 11 >< 16) 154 pounds per square inch. This measures the maximum shearing stress under the concrete slab, and is almost safe, even without the assistance furnished by the stirrups and the bars, which would come up diagonally through the ends of the concrete beam (where this maximum shear .occurs) nearly to the top of the concrete slab. The vertical planes on each side of the rib have a combined width of 10 inches, and therefore the unit-stress is >< 154 = 169 pounds per square inch. This is a case of true shear, and a 1:2:4 concrete should stand such a stress with a large factor of safety. But there are still other shearing stresses in these vertical planes. Considering a strip of the concrete slab, say, one foot wide, which is reinforced by concrete slab bars that are parallel to the girder, the elasticity of such a strip (if disconnected from the girder) would cause it to sag in the center. This must be prevented by the shearing strength of the concrete in the vertical plane along each edge of the girder rib. On account of the combined shearing stresses along these planes, it is usual to specify that when girders are parallel with the concrete slab bars, bars shall be placed across the girder and through the top of the concrete slab for the special purpose of resisting these shearing stresses.

Some of the stresses are indefinite, and therefore no precise rules can be computed for the amount of the reinforcement. But since the amount required is evidently very small, no great percentage of accuracy is important. A recent specification on this point required--inch bars, 5 feet long, spaced 12 inches apart. The shear of the girder, taken as a whole, should be computed as for simple concrete beams, as already discussed in Article 295; and stirrups should be used, as described in Article 279. Another special form of shear must be considered in this problem. Where the concrete beams enter the girders, there is a tendency for the concrete beams to tear their way out through the girder. The total load on the girder by the two concrete beams on each side, is of course equal to the total load on one concrete beam, and equals 37,350 pounds. Some of the reinforcing bars of the concrete beam will be bent up diagonally so that they enter the girder near its open end. We therefore have 2 X 22 > (11 = 484 square inches, the area to be sheared out. Dividing this figure into 37,350 will give 77 pounds per square inch.

Are You in Temple New Hampshire? Do You Need Concrete Cutting?

We Are Your Local Concrete Cutter

Call 603-622-4440

We Service Temple NH and all surrounding Cities & Towns